Home > Square Bar > Forging Stock Square Bars
High-Integrity Square Bars for Open Die & Closed Die Forging – Inox Steel India
Inox Steel India supplies square bars as forging stock, specifically intended for forging houses, press shops, and heavy engineering units that require reliable raw material for open die forging, closed die forging, and upset forging operations. Forging stock square bars must deliver internal soundness, uniform chemistry, controlled grain structure, and predictable deformation behavior under high pressure and temperature.
Square bars are widely used as forging stock because their solid cross-section and balanced geometry allow uniform material flow during forging. This ensures consistent shape formation, reduced internal defects, and improved mechanical performance in forged components.
Inox Steel India supplies forging stock square bars in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, and titanium, in hot rolled or forged condition, with sizes suitable for both light and heavy forging operations.
Forging houses prefer square bars over other sections due to their forging-friendly characteristics.
Key Forging Advantages:
Square bars are commonly forged into shafts, flanges, blocks, rings, valves, gears, hubs, and heavy-duty components used in critical industries.
Inox Steel India supplies forging-grade square bars in materials commonly required by forging houses:
Material selection depends on forging temperature, deformation ratio, and end-use application.
Forging stock square bars are supplied in formats suitable for forging operations:
All forging stock supplied by Inox Steel India maintains heat traceability and certification.
Forging operations demand raw material with sound internal structure, consistent chemistry, and predictable deformation behavior. Inox Steel India supplies square bars specifically selected and prepared to perform reliably during open die forging, closed die forging, press forging, and upset forging.
Forging Operations Supported
Square bars supplied as forging stock are suitable for a wide range of forging processes:
Common Forging Methods:
Square bars provide uniform deformation and controlled grain flow, which is critical to achieve defect-free forged components.
Forging houses use square bars to manufacture a wide range of components, including:
Square bars are preferred where billet stability and shape control are important during forging.
Forging stock is typically supplied in medium to large cross-sections, depending on press capacity and forging ratio.
Common Forging Stock Size Range:
📌 Sizes are often supplied oversize to allow deformation and finish machining.
| Forging Requirement | Recommended Square Bar Type |
|---|---|
| General Forging | Hot Rolled Square Bars |
| High Deformation & Integrity | Forged Square Bars |
| Precision Billet Length | Custom Cut Length Square Bars |
| High-Strength Forgings | Alloy Steel Square Bars |
| Corrosion-Resistant Forgings | Stainless / Duplex Square Bars |
Correct selection ensures better metal flow, reduced rejection rates, and improved forged part performance.
Square bars supplied by Inox Steel India for forging stock typically comply with:
Forging stock is supplied with:
Forging-grade square bars supplied by Inox Steel India offer:
These characteristics are essential for repeat forging cycles and high-volume production.
Forging companies rely on Inox Steel India for process-ready billets and documentation reliability.
Key Advantages:
Our focus is to supply forge-ready square bars, not generic stock material.
Forging stock supplied by Inox Steel India undergoes strict quality control to ensure reliability during forging.
🧪 Quality Checks Include:
This ensures defect-free forging and consistent grain flow during deformation.
Forging stock square bars are packed for heavy-duty handling and forging-yard use.
If your forging operation requires reliable square bars with consistent forging behavior, Inox Steel India supplies forge-ready raw material with certification and dependable logistics.
52-A, Mulji Thackersi Bldg, Islampura Street, Shop No. 10, Near Alankar Cinema, Mumbai – 400 004
alloy@inoxsteelindia.in, steel@inoxsteelindia.in
+91 9930796690
Yes, forging stock is usually supplied with allowance for deformation and machining.
Yes, ultrasonic testing is available on request.
Yes, custom cut lengths are supplied to match forging press requirements.
Carbon steel, alloy steel, stainless steel, duplex, nickel alloys, and titanium.
Inox Steel India supplies square bars as forging stock for forging houses. Suitable for open die & closed die forging.